RGPS-92222GCP-NP 26-port managed PoE Ethernet switch
Industrial 26-port managed Gigabit PoE Ethernet switch with 22x10/100/1000Base-T(X) P.S.E., 2xGigabit combo P.S.E. and 2x100/1000Base-X, SFP socket
- Support O-Ring (recovery time < 30ms over 250 units of connection) and MSTP(RSTP/STP compatible) for Ethernet Redundancy
- Open-Ring support the other vendor’s ring technology in open architecture
- O-Chain allow multiple redundant network rings
- Support standard IEC 62439-2 MRP (Media Redundancy Protocol) function
- 24 port P.S.E. fully compliant with IEEE802.3at standard, provide up to 30 Watts per port
- Support PoE scheduled configuration and PoE auto-ping check function
- Support IPV6 new internet protocol version
- Support Modbus TCP protocol
- Support IEEE 802.3az Energy-Efficient Ethernet technology
- Provided HTTPS/SSH protocol to enhance network security
- Support SMTP client
- Support IP-based bandwidth management
- Support application-based QoS management
- Support Device Binding security function
- Support DOS/DDOS auto prevention
- IGMP v2/v3 (IGMP snooping support) for filtering multicast traffic
- Support SNMP v1/v2c/v3 & RMON & 802.1Q VLAN Network Management
- Support ACL, TACACS+ and 802.1x User Authentication for security
- Supports 9.6K Bytes Jumbo Frame
- SFP socket support DDM function (Port 25~26 only)
- Multiple notification for warning of unexpected event
- Web-based ,Telnet, Console (CLI), and Windows utility (Open-Vision) configuration
- Support LLDP Protocol
- 19 inches rack mountable design
| Physical Ports | |||
|
10/100/1000Base-T(X) with P.S.E. Ports in RJ45 Auto MDI/MDIX |
22 | ||
|
Gigabit Combo port with 10/100/1000Base-T(X)P.S.E. and 100/1000Base-X SFP ports |
2 | ||
| 100/1000Base-X with SFP port | 2 | ||
| Technology | |||
| Ethernet Standards |
IEEE 802.3 for 10Base-T |
||
| MAC Table | 8K | ||
| Priority Queues | 8 | ||
| Processing | Store-and-Forward | ||
| Switch Properties | Switching latency: 7 us Switching bandwidth: 52Gbps Max. Number of Available VLANs: 4095 VLAN ID Range : VID 1 to 4094 IGMP multicast groups: 256 for each VLAN Port rate limiting: User Define |
||
| Jumbo frame | Up to 9.6K Bytes | ||
| Security Features | Device Binding security feature Enable/disable ports, MAC based port security Port based network access control (802.1x) Single 802.1x and Multiple 802.1x MAC-based authentication QoS assignment Guest VLAN MAC address limit TACACS+ VLAN (802.1Q ) to segregate and secure network traffic Radius centralized password management SNMPv3 encrypted authentication and access security Https / SSH enhance network security Web and CLI authentication and authorization Authorization (15 levels) IP source guard |
||
| Software Features | IEEE 802.1D Bridge, auto MAC address learning/aging and MAC address (static) Multiple Registration Protocol (MRP) MSTP (RSTP/STP compatible) Redundant Ring (O-Ring) with recovery time less than 30ms over 250 units TOS/Diffserv supported Quality of Service (802.1p) for real-time traffic VLAN (802.1Q) with VLAN tagging IGMP v2/v3 Snooping IP-based bandwidth management Application-based QoS management DOS/DDOS auto prevention Port configuration, status, statistics, monitoring, security DHCP Server/Client DHCP Relay Modbus TCP DNS client proxy SMTP Client NTP server |
||
| Network Redundancy | O-Ring Open-Ring O-Chain MRP MSTP (RSTP/STP compatible) |
||
| RS-232 Serial Console Port | RS-232 in DB-9 connector with console cable. 115200bps, 8, N, 1 | ||
| LED Indicators | |||
| Power indicator (PWR) | Green : Power indicator | ||
| Ring master indicator (R.M.) | Green : Indicates that the system is operating in O-Ring Master mode | ||
| O-Ring Indicator (Ring) |
Green : Indicates that the system operating in O-Ring mode |
||
| Fault Indicator (Fault) | Amber : Indicate unexpected event occurred | ||
| 10/100/1000Base-T(X) RJ45 Port Indicator |
Dual color LED for Speed/Link/Act indicator ~ |
||
| 100/1000Base-X SFP Port Indicator | Green for port Link/Act. | ||
| PoE Indicator | Green : PoE enabled LED x 24 | ||
| Fault contact | |||
| Relay | None | ||
| Power | |||
| Power Input | 100~240VAC with power socket | 50 ~ 57VDC with terminal block | |
| Power supply |
450 Watts power supply included(320W power budget) |
1000 Watts power supply included(720W power budget) |
Power supply not include |
| Power consumption (Typ.) |
37 Watts (P.D. not included) |
37 Watts (P.D. not included) |
17 Watts (P.D. not included) |
| Overload Current Protection | Present | ||
| Reverse Polarity Protection | Not Present | ||
| Physical Characteristics | |||
| Enclosure | 19 inches rack-mountable | ||
| Dimensions (W x D x H) | 431 (W) x 342 (D) x 44 (H) mm (16.97 x 13.47 x 1.73 inch) | ||
| Weight (g) | 5000 g | 5730 g | 3982 g |
| Environmental | |||
| Storage Temperature | -40 to 85°C (-40 to 185°F) | ||
| Operating Temperature | -40 to 60°C (-40 to 140°F ) | ||
| Operating Humidity | 5% to 95% Non-condensing | ||
| Regulatory Approvals | |||
| EMI | FCC Part 15, CISPR (EN55022) class A | ||
| EMS | IEC61000-4-2 (ESD), IEC61000-4-3 (RS), IEC61000-4-4 (EFT), IEC61000-4-5 (Surge), IEC61000-4-6 (CS), IEC61000-4-8, IEC61000-4-11 | ||
| Shock | IEC60068-2-27 | ||
| Free Fall | IEC60068-2-32 | ||
| Vibration | IEC60068-2-6 | ||
| Safety | EN60950-1 | ||
| Warranty | 5 years | ||
